Messages

1

Member Contributions / Re: BlueDroid, an Android app for controlling a BlueSpray system

« on: June 26, 2020, 05:23:40 pm »

The lawn view requires a large screen for drag and drop.  The phone screen is too small for it to be useful.  Hence, the phone app is designed for quick and easy functions such as turning on a zone and standard configurations.
For all other (advanced) functions, you should use your desktop browser.

2

Help / Re: Running multiple valves simultaneously

« on: June 17, 2020, 11:35:19 pm »

The calendar view doesn't impose one run on the other well.  But you can see the runs under Today's Runs when the run day comes.

3

Member Contributions / Re: BlueDroid, an Android app for controlling a BlueSpray system

« on: June 13, 2020, 04:13:17 pm »

We now have iOS and Android app.  Please search your app store for the official BlueSpray app.

4

Help / Re: Running multiple valves simultaneously

« on: June 13, 2020, 04:07:51 pm »

In order to run multiple zones concurrently, you'd want to set Stack mode (Settings->Operation) to No, then schedule your programs to start at the same time.

Please be careful not to have 1 zone overlapping the same time.  The best way is not to repeat the zones in your programs i.e. if program 1 has Zone 1 in it, program 2 should not.

For example:

1. Program 1 has zones 1, 3, 5, 7 on for 10 min, others 0 min.
2. Program 2 has zones 2, 4, 6, 8 on for 10 min, others 0 min.

5

Announcements / Re: BlueSpray Android app is released

« on: May 28, 2020, 07:18:54 pm »

iOS app is now available on Apple App Store.  Just search for BlueSpray!

6

Announcements / BlueSpray Android app is released

« on: May 20, 2020, 11:28:54 pm »

We're excited to announce the release of our Android app.  You can search for BlueSpray in the Android Play Store and install it.

IOS is coming soon.  It's just a matter of going through Apple's red tapes right now.

7

General Discussion / Re: Firmware 2.2.2

« on: February 27, 2020, 08:08:37 pm »

The best way to upgrade is to go to Settings->Administration and click the Download button and let the controller do the rest.

You should not download the firmware file, then upload. That was for going from 1.x to 2.x firmware.

8

Help / Re: Water cancels Season/ Run Name not run: System suspended...?

« on: October 04, 2019, 03:56:09 pm »

Your controller was either in Standby or Delay mode at the time.

9

Bug Reports / Re: Rain Sensor Problem

« on: August 25, 2019, 11:33:33 am »

You have to tell the controller your rain sensor is normally closed or normally open.

You can test the controller's rain sensor port by not having anything connected to the rain sensor terminals.  Configure it as an NO sensor.  Now, short the rain sensor terminals.  If the controller says it's active, it's good.

10

Feature Request / Re: Soil Moisture Sensor Integration

« on: August 06, 2019, 10:15:20 pm »

If it's a on/off moisture sensor, you can connect it to the rain sensor and configure it as a rain sensor.

11

Bug Reports / Re: Password Request

« on: August 06, 2019, 10:14:07 pm »

You probably enabled login by mistake.  You can log onto your account and access your controller through the cloud.
Go to Settings->System and disable login.

12

Help / Re: Weather forecast button displays no information

« on: August 06, 2019, 10:09:08 pm »

The controller only pulls the weather 1 hour prior to a run.  If you don't have a run that day or it hasn't run yet, it may not show the weather info.

13

Bug Reports / Re: 2.2 disables Plus button in History view

« on: July 17, 2019, 09:44:47 pm »

This issue is fixed in 2.2.1.  Coming soon...

14

Announcements / ATTENTION: If you have port forwarding for BlueSpray, read on

« on: February 06, 2019, 08:16:15 pm »

It has come to our attention that some of BlueSpray controllers out there have been accessed by unauthorized personnel.  After a thorough investigation, we've concluded that those systems were accessed via port forwarding at the router which expose the controller to the public.

If you have set up port forwarding to your controller, please turn off the port forwarding service at your router.
As of version 2.x, you no longer need port forwarding in order to access your BlueSpray controller.  You can access it from any where via the cloud now, which is more secure and convenient.  Just log onto your account on our web site.

If for any reason, you still insist on having port forwarding, please at least set up login password for your controller.  Just go to Settings->System and Select Login to "Yes"

15

Help / Re: API sample code?

« on: January 27, 2019, 12:07:00 pm »

You might want to email support.  We don't want to show it publicly.