Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - bluespray_admin

Pages: 1 ... 3 4 [5] 6 7 ... 22
General Discussion / Re: Firmware 2.1
« on: August 07, 2016, 07:13:01 pm »

General Discussion / Re: Anyone want an Android app?
« on: August 03, 2016, 08:01:19 pm »
FYI, we've just created a board names Members Contributions.  When you have your app, you can post it there and let every one chime in.

Feature Request / Re: Logging and syslog
« on: July 20, 2016, 10:17:30 pm »
I guess 2.1.0 fixed it

Feature Request / Re: Logging and syslog
« on: July 19, 2016, 06:51:09 pm »
That is true Canada_Guy. If your rain sensor is Normally Open, you can just jump the rain sensor terminals.  If it is Normally Closed, you can just remove 1 of the wires.

Panther, can you update your firmware to see if it helps?

Help / Re: Rain Sensor
« on: July 16, 2016, 03:25:26 pm »
The controller considers the rain sensor tripped when the rain sensor goes from dry to wet.

Firmware updates / BlueSpray firmware 2.1 is released
« on: July 14, 2016, 12:49:09 am »
We are pleased to announce the release of BlueSpray firmware version 2.1.  There has been smaller releases since 2.0, in 2.1 we've made it official for these features which we've added since 2.0:

1. Cloud access: you no longer need to do port forwarding.  Just register your controller and access it from your BlueSpray account.
2. Multiple Master Valve: you can turn any of your unused terminals as extra master valve(s) in addition to the main master valve.  If you have multiple water sources, this feature is for you.  You can also use the extra master valve to turn on additional pump.  You can also assign any master valve or none to any program.
3. Drag lock: when you lock the drag, it stays even after you quit your browser.

Bug fixes:

1. Phone UI: we've not updated the phone UI after many features have been added and it fell behind.  We've fixed it and improved in in 2.1.
2. Tablet UI: with the multiple master valve feature, you need to select master valve in every manual run.
3. Enforce required fields for Network Settings: The fields IP address, Netmask, DNS and Gateway cannot be blank.
4. Unexpected flow: the controller correctly identify unexpected flow when there is no run activity.
5. Fix manual run sometimes does not start.

Feature Request / Re: Logging and syslog
« on: July 12, 2016, 08:42:06 pm »
Can you try by pressing and hold the plunger on top of your rain sensor to simulate a sensor trip to see if it logs?

Help / Re: Upgrade to 2.0.2, unit no longer responding at all
« on: July 12, 2016, 08:40:37 pm »

Please check your email for how to find the API doc.

Feature Request / Re: Logging and syslog
« on: July 11, 2016, 07:56:17 pm »
When the sensor changes state, the controller knows immediately.  However, if the controller comes up after a reboot (or power outage) and the sensor was tripped while it was out, it may not have any thing to reference to and miss it.

Help / Re: Upgrade to 2.0.2, unit no longer responding at all
« on: July 11, 2016, 07:54:28 pm »
It's cold be a software issue.  But since there is no log, we don't really know unless we can get access to the controller.
What we can do now is monitor it and hopefully we can catch it when it starts to miss.

Feature Request / Re: Logging and syslog
« on: July 08, 2016, 09:12:37 pm »
It should log it to the UI.  This log is the high level historical log that is stored.  The lower level system log is recycled and holds very little info that is interested by you.

Bug Reports / Re: Can not do manual runs after Canceling a run
« on: July 08, 2016, 07:35:35 pm »
When in stack mode, all schedules a stacked after another.  So your manual run is stacked.  You can get around it by setting Stack mode to "No".

Bug Reports / Re: Spike and Surge
« on: July 08, 2016, 07:34:09 pm »
The controller does have a 1A fuse which will blow if there is a surge or short in the AC line, which should be good for normal use.  But nothing will stand up the power of a lightning unless you have a lightning arrestor.

Feature Request / Re: Logging and syslog
« on: July 04, 2016, 11:56:05 am »
If the rain sensor is tripped, the controller does log it.  The system temporarily suspends watering when this happens, so there is not much activity to log.
The controller does not cancel the run as in the weather case because the sensor can dry out at any time and the run will resume.

The log on the UI is not the system log.  It is only an event log.

General Discussion / Re: Light Control
« on: July 01, 2016, 04:37:45 pm »
Yes, we use an expansion module and power it with a 12V AC transformer that comes with the light.  It was done to demonstrate the software capability of the controller only.  It is not recommended for real usage.

We're currently working on a lightning module.  It will be a smart module that would take command from the controller and control lights.

The light icon will appear when the light module is plugged in.

Pages: 1 ... 3 4 [5] 6 7 ... 22