BlueSpray Community

Techical Discussions => Bug Reports => Topic started by: frank.goforth@gmail.com on October 05, 2014, 08:32:27 pm

Title: Zone X runs during all zones
Post by: frank.goforth@gmail.com on October 05, 2014, 08:32:27 pm

My controller has been working great.  I went on vacation and upon coming back, noticed a broken head.  I replaced the head and the next morning I noticed that zone was watering during another zone's period.  I figured I had gotten dirt in the line and caused a valve to stick.  I had an irrigation company come out and check the valve.  Once everything looked good, we tried to run the system but only the one zone would work.   Any zone plugged into that slot worked (i.e. switched wire from Zone 4 to Zone 5 - the bad zone - and Zone 4 worked and nothing else did).  We wired my old manual controller and everything worked.  I just got through wiring my BlueSpray controller again, plugged it in, and tried Zone 4.  Zone 5 water came on, too.

I REALLY like this controller, but it is unusable at the moment.  Help!

Title: Re: Zone X runs during all zones
Post by: bluespray_admin on October 05, 2014, 09:57:43 pm

Frank,

Please email our support group and they can help you with your problem individually.