BlueSpray Community
Techical Discussions => Help => Topic started by: rl1131 on August 18, 2014, 07:16:05 pm
-
Greetings,
Today the gardener was here and needed me to run zone 1 for a couple of minutes. So, I thought yeah... I can do that. So I logged into the controller via iPhone web-app and tried this:
1. Selected "Water now" from the home page.
2. Scroll down so "Run times" zone 1 is visible.
3. Press on the time window where there is a "0" displayed for zone 1.
4. Time pop up comes up asking for a time of day (i.e. 12:00 AM)...
Okay... So, the interface is selecting the wrong kind of "time" popup. Alright... so I tried selecting 12:02 AM thinking that this would be time zero (midnight) plus two minutes. The system should run for two minutes then... well, no.
So, it appears that whatever I select for a zone in the "Water now" selection I can not get it to "Water now."
Any updates for this or maybe another way to allow me to run a single zone for a set period of time from the mobile web-app?
Thanks,
-Robert
-
One other note:
When I select 12:02 AM and press the "set" button the zone 1 time changes to "02 AM"
-Robert
-
This is how I access it from the basic iPhone interface (not the one that shows a lawn view).
If you just want to run one zone, select "Settings", then "ZONES", then touch on the water drop. A set of numbers should pop up on a wheel. One for minutes, one for seconds. Just spin to the correct number appears and press "SET".
From the full interface (lawn view), I touch on the sprinkler icon on the picture, the time wheels pop up Spin to the time you want and press SET.
-
There is a bug on the phone interface for manual run. You should use Settings->Zones, then click on the water drop of the zone you want to water.
We'll have it fixed in the next firmware release.
-
Thanks for both replies. Using the Settings->Zones worked.