BlueSpray Community
Techical Discussions => Help => Topic started by: tomt on June 04, 2014, 02:52:11 pm
-
What does a flashing sprinkler indicate? I can't find it in any of the blogs or instructions. I have a sprinkler that was scheduled to run and it was flashing after the run time was over. It flashes about once ever 10 seconds. We launched a different manual sprinkler, and it was a steady run indication until the flashing one turns on, then it spraying indication turns off.
-
There are 3 indicating lights (LED) on the controller.
1. Green - power is presence. Should be solid at all times.
2. Blue - there is wifi traffic/data. Solid on boot, blinks when there is data/traffic.
3. Amber - attention. Solid when boots, blinks means attention (can't get time), solid is no good - bad flash.
There are detailed descriptions in the User Manual.
-
This is the flashing sprinkler displayed on the Lawn View, not the lights on the box itself.
-
It is just an indication that particular zone is being active (watered).
-
Normally when a zone is being watered, the "spray" indication is steady. This one is periodically flashing on, but the zone is not watering.
-
Does it flash on one particular zone or all zones?
-
So far, it has only been on one particular zone that I have noticed it.
-
Please email our support group to discuss this problem in detail.