241
Help / Re: All LEDs on and no connectivity
« on: May 23, 2014, 09:34:53 pm »
I hope not, but please contact our support group for better handling of this case.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
242
Bug Reports / Re: Can no longer access Controller
« on: May 20, 2014, 10:07:15 am »
Please email our support group to discuss this problem.
243
Bug Reports / Re: Complied bug report
« on: May 20, 2014, 10:05:54 am »
Calendar is designed to show from the next day. Current or today's runs are shown on the left column, under Today's Runs.
Programs - are you talking about the phone UI?
Schedules - should be fixed in the latest firmware.
Lawn view - you can prevent the zones from moving by clicking on the lock button in the lawn view.
Mobile - should be fixed in latest firmware
Programs - are you talking about the phone UI?
Schedules - should be fixed in the latest firmware.
Lawn view - you can prevent the zones from moving by clicking on the lock button in the lawn view.
Mobile - should be fixed in latest firmware
245
Help / Re: Another port forwarding question
« on: May 18, 2014, 05:41:56 pm »
For the starting and ending ports, please try 8000 and 8000 to see if it works.
246
Announcements / Re: Firmware v1.2 is released
« on: May 17, 2014, 02:20:50 am »
Steve, please email our support group to get personal help.
247
Feature Request / Re: Master Valve Control by Zone
« on: May 17, 2014, 02:18:39 am »
You can dedicate one of the terminals to your pump. Add a program and schedule to run that pump only. Then run it in parallel to your runs.
248
Help / Re: New Firmware Uploaded Now Cannot Connect to Controller
« on: May 17, 2014, 02:07:07 am »
Steve,
What are the lights indicating? The amber and blue light should go away. If they remain solid, then it is bricked. If so, please email our support team.
What are the lights indicating? The amber and blue light should go away. If they remain solid, then it is bricked. If so, please email our support team.
249
Help / Re: Port forwarding for Verizon FIOS router
« on: May 13, 2014, 03:38:08 pm »
If you have a Verizon FIOS router, you'll need firmware 1.2.
1. In Settings->System, set HTTP and HTTPS ports. Example: 8000 and 8443, but you can choose any other port not 80 and 443.
2. In your router, your port forwarding set up should look something like this:
BlueSpray IP address ->
Destination Ports 8xxx
TCP Any -> 8xxx All Broadband Devices Active
Where 8xxx can be either 8000 or 8443 or other ports that you've set in (1) above.
For example. if your BlueSpray controller IP address is 192.168.1.100, then your rule should look something like this:
192.168.1.100:8000 HTTP All Broadband Devices Active
TCP Any ->8000
Or if you prefer https:
192.168.1.100:8443 HTTPS All Broadband Devices Active
TCP Any ->8443
1. In Settings->System, set HTTP and HTTPS ports. Example: 8000 and 8443, but you can choose any other port not 80 and 443.
2. In your router, your port forwarding set up should look something like this:
BlueSpray IP address ->
Destination Ports 8xxx
TCP Any -> 8xxx All Broadband Devices Active
Where 8xxx can be either 8000 or 8443 or other ports that you've set in (1) above.
For example. if your BlueSpray controller IP address is 192.168.1.100, then your rule should look something like this:
192.168.1.100:8000 HTTP All Broadband Devices Active
TCP Any ->8000
Or if you prefer https:
192.168.1.100:8443 HTTPS All Broadband Devices Active
TCP Any ->8443
250
Firmware updates / BlueSpray firmware 1.2 is GA
« on: May 13, 2014, 03:33:27 pm »
We’re excited to announce the official GA of our latest firmware version 1.2. It is available for download from our support page:
http://www.bluespray.net/support.html
Just click on latest firmware.
List of new features in 1.2:
1. Google map integration – you now can use google map directly in addition to hosting your own picture. Just click on the wrench button on the lawn view. Select Google Map, enter your home address. Choose the view that is best for you by tilting/zooming (subject to availability from Google Map). Click on “Save” and you’re done.
2. Water in seconds – you now can water down to the seconds. You can choose between minutes or seconds as unit.
3. Multiple HTTP/HTPS ports – some of our users can only do port mapping instead of port forwarding. So we’ve added 1 more HTTP port (8000) and 1 HTTPS port (8443). These are also configurable, so you can change them to any port number that you need.
4. One click firmware update – from now on, if there is a latest version of firmware available, just click on the Update button and the controller will download the latest firmware and update itself.
5. Weather settings now changed to Conserve – we’re planning on adding additional water conservation feature in addition to weather forecast. Just stay tuned.
6. Embedded User Manual – the manual is included on the controller. You don’t have to look for it. You don’t have to download it from the internet.
http://www.bluespray.net/support.html
Just click on latest firmware.
List of new features in 1.2:
1. Google map integration – you now can use google map directly in addition to hosting your own picture. Just click on the wrench button on the lawn view. Select Google Map, enter your home address. Choose the view that is best for you by tilting/zooming (subject to availability from Google Map). Click on “Save” and you’re done.
2. Water in seconds – you now can water down to the seconds. You can choose between minutes or seconds as unit.
3. Multiple HTTP/HTPS ports – some of our users can only do port mapping instead of port forwarding. So we’ve added 1 more HTTP port (8000) and 1 HTTPS port (8443). These are also configurable, so you can change them to any port number that you need.
4. One click firmware update – from now on, if there is a latest version of firmware available, just click on the Update button and the controller will download the latest firmware and update itself.
5. Weather settings now changed to Conserve – we’re planning on adding additional water conservation feature in addition to weather forecast. Just stay tuned.
6. Embedded User Manual – the manual is included on the controller. You don’t have to look for it. You don’t have to download it from the internet.
251
Announcements / Firmware v1.2 is released
« on: May 13, 2014, 03:32:16 pm »
We are please to announce the release of BlueSpray firmware version 1.2. Please read the Firmware Update thread for details of what is included in this release.
252
Feature Request / Re: Email Warning on Heartbeat Failure
« on: May 13, 2014, 10:42:52 am »
Can't promise anything, but it is a good idea. We will put it in the feature request queue.
253
Bug Reports / Re: RESOLVED: Time wheels instead of minute wheels
« on: May 12, 2014, 10:58:48 am »
This problem was fixed in latest firmware
254
Feature Request / Re: Battery/Solar power
« on: May 05, 2014, 01:34:12 am »
Our controller (and the solenoids) operates on 24V AC. If your solar power can supply that voltage, it should work.
255
General Discussion / Re: Using more than 2 units
« on: May 05, 2014, 01:33:02 am »
Yes, that would not be a problem at all.